Stainless steel case recessed handle M207NSS
The stainless steel handle M207NSS is a stainless steel version of the M207 model, with no black PVC glue on the handle.
This type is usually used by our customers on a aluminum box or a box with harder materials. This handle has all the advantages of a stainless steel handle, such as rust resistance, dirt resistance, and stain resistance. The size is 133*80MM, and the ring is 6.0 or 8.0MM. It is made of heavy-duty stainless steel by automatic stamping machine, and is polished and assembled.
How to make a installation for stainless steel
The installation method of the stainless steel handle may vary depending on the model and type of the handle, but generally, the following steps can be followed:
1. Prepare installation tools: Usually, a screwdriver, wrench, and other tools are required.
2. Determine the installation location: Select the appropriate installation location according to the need, usually on the side or top of the box.
3. Drill holes: Drill holes at the installation location, and the size of the holes should match the screw size of the handle.
4. Install the handle: Pass the screw of the handle through the hole and tighten it with a screwdriver.
5. Check the installation effect: After the installation is completed, check whether the handle is firm and whether it can be used normally.
It should be noted that during the drilling and installation process, it is necessary to ensure that the screws and hole positions of the handle match to ensure a firm installation. At the same time, before installation, it is necessary to ensure that the surface of the box is flat to avoid skew or instability after installation.
